Clever Models Gorre Engine House in N Scale, Day 1

Spent most of the day working on these windows for the Clever Models Gorre Engine House. I still need to make the interior trim (because this is a building you can see into) and the skylights. I decided to work on windows first, because I was experimenting, and I wasn't sure how they would turn out -- I didn't want to be nearly finished with the building and have no way to make decent windows.

Penny for scale.

The mullions are inkjet printed on transparency film, while the trim is cardstock which I soaked in cyanoacrylate before cutting. This made it easier to avoid overcutting because the cardstock is a little tougher and more like plastic. 

While the building would look better with several windows open, I decided that one was enough, because it was really difficult to do. 

My new Glue Looper tools proved very useful today. They're little doodads that fit in an X-Acto handle and give you a tiny metal loop you can use to transfer CA glue to tiny spots. I clamped the transparencies to the frames with wee clothespins, dipped the Glue Looper into a drop of CA, gently touched the edge of the transparency -- and just the right amount of glue seeped between the parts through capillary action. Slick!

I stopped shortly after taking this photo because the CA was misbehaving as I soaked window frames, and it began dripping onto my workspace. It was just a matter of time before I glued my fingers together, which, surprisingly, I didn't do all afternoon. Thank you, Glue Looper!